Products

Are all polypropylene depth pleated filter designed for fine slurry dispersion in chemical-mechanical polishing and multi-layer ceramic capacitor applications.

Are composed of polypropylene melt-blown media that has graded fiber diameter and density. The construction provides exceptional filter service life with high flow rate, consistent retention and stability in a wide range of operating conditions.

The encapsulated filters simplify installation and change out with minimizing down time and contamination of the process

Coalescer filter element is made of a variety of composite materials by special process. With hydrophilic characteristics, it can not only remove the mechanical impurities from the liquid, but also separate the emulsified water from the liquid through demulsification and coalescence process, and then it can coalescer the emulsified water into larger water droplets to further realize the purification of the liquid.

There are 2 main types of hepa:
Normal temperature Hepa
Heat resistant Hepa
Type: Flat box, Gel, FFU, EFU, BFU.
Frame: AL, SUS, GI
Media: Fiberglass, Aluminum foil type, PTFE
Sealant material: Normal sealant, Heat-resistant sealant.
Gasket: NEO, EPDM, PTFE
Operating temperature: Maximum 250℃
Humidity: 100%
Filtration efficiency: 99%, 99.9%, 99.975, 99.995% at 0.3um

Is general grade filter bags designed for a particle removal in a wide range of filtration.

Filter Bag are available in nominal ratings range from 1 to 200 micron.

Composite activated carbon is an activated carbon filter designed for reducing contaminants such as colors, bad odors, bad tastes by dissolved organics and chlorine

This filter is composed of coal based activated granular carbon together with binder and synthetic fibers. This unique construction allows maximum contact time between the fluid and the activated carbon, ensuring optimal adsorption and minimize channeling and bypass

Activated carbon block filter is an activated carbon filter designed for reducing contaminants such as colors, bad odors, bad tastes by dissolved organics and chlorine

This filter is composed of coal based activated  carbon extruded together with thermoplastic binder and polypropylene synthetic fibers.

This unique construction allows maximum contact time between the fluid and the activated carbon, ensuring optimal adsorption and minimize channeling and bypass

Are hydrophilic PVDF membrane filter designed for particulate matter removal in a wide range of applications.

Is made up of PVDF nanofiber webs thinner than 200 nanometers, which maximizes porosity of the filter media and results in high flow rate with a lower pressure drop and exceptional filter service life. The filter media has very narrow pore size distributions and provide higher particle removal efficiency as well.

Are hydrophobic PVDF membrane filter designed for particulate matter removal in a wide range of applications.

Is made up of PVDF nanofiber webs thinner than 200 nanometers, which maximizes porosity of the filter media and results in high flow rate with a lower pressure drop and exceptional filter service life. The filter media has very narrow pore size distributions and provide higher particle removal efficiency as well.

Is an Nylon66 membrane sterile filter with an all-polypropylene construction designed for a wide range of the bio and pharmaceuticals industries

Are made up of a multi-zone nylon66 membrane in an all-polypropylene construction with high surface area, providing for very low pressure and longer filter service life. Nylon is characterized as a polymer with poler fluctional groups, which effectively help the filters retain polar particles, endotoxin, microorganisms gel contaminants.